PII4KIP200
PIISUN
| Quantity: | |
|---|---|
No matter it’s a sports bar, retail store, house of worship, casino or other scenario, the 4KIP204E 4K HDMI over IP encoder can work with PII4KIP200 decoders to build a distributed IP matrix with video walls.
Install the PII4KIP204E & PII4KIP200 IP codecs in your sports bar, ideal for multiple HDMI signal extension, distribution, switching, video wall and mobile centralized control. It ensures your patrons enjoy the best screen viewing experience possible.
Utilize the powerful PII4KIP204E & PII4KIP200 HDMI over IP solution to distribute 4x HDMI source to multiple displays in your church. It can grant your priest or pastor with a seamless and user-friendly setup to communicate content and information to your parish.
Install PII4KIP204E & PII4KIP200 in an equipment room of a shopping mall or retail store, and distribute all advertisements to every corner/corridor in your shop. With the dazzling video walls, the solution helps boost your business with superior video and sound.
The PII4KIP204E over IP encoder can work flawlessly with a universal Ethernet switch, both managed and unmanaged. Don’t need to spend so much time configuring IGMP any more, as it is truly plug-n-play. Whether you are an installer or end-user, you can effortlessly complete installation, even if you were not exposed to any IP knowledge before.
Important Notes before Purchasing:
1. This IP encoder can’t be used alone; it must be used with one or more PII4KIP200 decoders for HDMI signal extension or splitting. One encoder can distribute an HDMI signal to maximum 50 units of decoder simultaneously.
2. It can’t work with the PIIHDIP100 encoders/decoders in the same network.
3. This IP encoder doesn’t support PoE.
| PII4KIP200E/D | PII4KIP204E | PIIHDIP100E/D | PIIHDIP120E/D | PII4KIP100-KVM | |
| Product Type | Transmitter & Receiver | Transmitter | Transmitter & Receiver | Transmitter & Receiver | Transmitter & Receiver |
| HDMI Interface | Transmitter: 1x HDMI in Receiver: 1x HDMI out | 4x HDMI in | Transmitter: 1x HDMI in Receiver: 1x HDMI out | Transmitter: 1x HDMI in Receiver: 1x HDMI out | Transmitter: 1x HDMI in Receiver: 1x HDMI out |
| Supported Video Resolution | Up to 4K@30hz | Up to 4K@30hz | Up to 1080P@60Hz | Up to 1080P@60Hz | Up to 4K@30hz; 1080P@120hz |
| HDMI | 1.4 | 1.4 | 1.3 | 1.3 | 1.4 |
| HDCP | 2.2 | 2.2 | 1.4 | 1.4 | 1.4 |
| Audio Channel | Stereo | Stereo | Stereo | Stereo | 7.1 Channel |
| Type of Switch Required | 100M (1G recommended) | 100M (1G recommended) | 100M (1G recommended) | 100M (1G recommended) | 1G |
| Connection Mode | One to one, one to many, many to many | One to one, one to many, many to many (works with 4KIP200D) | One to one, one to many, many to many | One to one, one to many | (Multiple) one to one |
| One-to-One Transmission Range | Transmits 4K@30hz HDMI signal up to 120m/394ft | Transmits 4K@30hz HDMI signal up to 120m/394ft | Transmits 1080P@60hz HDMI signal up to 120m/394ft | Transmits 1080P@60hz HDMI signal up to 120m/394ft | Transmits 4K@30hz HDMI signal up to 120m/394ft |
| KVM Extension | No | No | No | No | Yes |
| PoE | Yes | No | Yes | No | No |
| IR Control | No | No | No | Yes | No |
| RS232 | Yes | No | Yes | No | No |
| Video Wall | Yes, up to 8x8 | Yes, up to 8x8 (need to work with 4KIP200D) | Yes, up to 8x8 | No | No |
| Visual Control on App | Yes | Yes | Yes | No | No |
| Video | |
| Input Port | 4 x HDMI |
| Input Resolutions | up to 3840x2160p@30Hz |
| Output Port | 1 x LAN |
| Output Resolutions | up to 3840x2160p@30Hz |
| Video Protocol | H.265 |
| Audio | |
| Input Port | 4 x HDMI |
| Output Port | 1 x LAN |
| Audio Format | MPEG4-AAC Stereo |
| Control | |
| Control Method | Front Panel Buttons, VDirector App (IOS/Android/Windows Version) |
| General | |
| Power Supply | DC12V 3A |
| Power Consumption | 14W (Max) |
| Dimensions (W x H x D) | 215mm x 25mm x 260.2mm/ 8.46” x 0.98” x 10.24” |
| Net Weight | 1.40kg/3.08lbs |
MORE CUSTOMIZATION, DISCUSS to us Directly please
No matter it’s a sports bar, retail store, house of worship, casino or other scenario, the 4KIP204E 4K HDMI over IP encoder can work with PII4KIP200 decoders to build a distributed IP matrix with video walls.
Install the PII4KIP204E & PII4KIP200 IP codecs in your sports bar, ideal for multiple HDMI signal extension, distribution, switching, video wall and mobile centralized control. It ensures your patrons enjoy the best screen viewing experience possible.
Utilize the powerful PII4KIP204E & PII4KIP200 HDMI over IP solution to distribute 4x HDMI source to multiple displays in your church. It can grant your priest or pastor with a seamless and user-friendly setup to communicate content and information to your parish.
Install PII4KIP204E & PII4KIP200 in an equipment room of a shopping mall or retail store, and distribute all advertisements to every corner/corridor in your shop. With the dazzling video walls, the solution helps boost your business with superior video and sound.
The PII4KIP204E over IP encoder can work flawlessly with a universal Ethernet switch, both managed and unmanaged. Don’t need to spend so much time configuring IGMP any more, as it is truly plug-n-play. Whether you are an installer or end-user, you can effortlessly complete installation, even if you were not exposed to any IP knowledge before.
Important Notes before Purchasing:
1. This IP encoder can’t be used alone; it must be used with one or more PII4KIP200 decoders for HDMI signal extension or splitting. One encoder can distribute an HDMI signal to maximum 50 units of decoder simultaneously.
2. It can’t work with the PIIHDIP100 encoders/decoders in the same network.
3. This IP encoder doesn’t support PoE.
| PII4KIP200E/D | PII4KIP204E | PIIHDIP100E/D | PIIHDIP120E/D | PII4KIP100-KVM | |
| Product Type | Transmitter & Receiver | Transmitter | Transmitter & Receiver | Transmitter & Receiver | Transmitter & Receiver |
| HDMI Interface | Transmitter: 1x HDMI in Receiver: 1x HDMI out | 4x HDMI in | Transmitter: 1x HDMI in Receiver: 1x HDMI out | Transmitter: 1x HDMI in Receiver: 1x HDMI out | Transmitter: 1x HDMI in Receiver: 1x HDMI out |
| Supported Video Resolution | Up to 4K@30hz | Up to 4K@30hz | Up to 1080P@60Hz | Up to 1080P@60Hz | Up to 4K@30hz; 1080P@120hz |
| HDMI | 1.4 | 1.4 | 1.3 | 1.3 | 1.4 |
| HDCP | 2.2 | 2.2 | 1.4 | 1.4 | 1.4 |
| Audio Channel | Stereo | Stereo | Stereo | Stereo | 7.1 Channel |
| Type of Switch Required | 100M (1G recommended) | 100M (1G recommended) | 100M (1G recommended) | 100M (1G recommended) | 1G |
| Connection Mode | One to one, one to many, many to many | One to one, one to many, many to many (works with 4KIP200D) | One to one, one to many, many to many | One to one, one to many | (Multiple) one to one |
| One-to-One Transmission Range | Transmits 4K@30hz HDMI signal up to 120m/394ft | Transmits 4K@30hz HDMI signal up to 120m/394ft | Transmits 1080P@60hz HDMI signal up to 120m/394ft | Transmits 1080P@60hz HDMI signal up to 120m/394ft | Transmits 4K@30hz HDMI signal up to 120m/394ft |
| KVM Extension | No | No | No | No | Yes |
| PoE | Yes | No | Yes | No | No |
| IR Control | No | No | No | Yes | No |
| RS232 | Yes | No | Yes | No | No |
| Video Wall | Yes, up to 8x8 | Yes, up to 8x8 (need to work with 4KIP200D) | Yes, up to 8x8 | No | No |
| Visual Control on App | Yes | Yes | Yes | No | No |
| Video | |
| Input Port | 4 x HDMI |
| Input Resolutions | up to 3840x2160p@30Hz |
| Output Port | 1 x LAN |
| Output Resolutions | up to 3840x2160p@30Hz |
| Video Protocol | H.265 |
| Audio | |
| Input Port | 4 x HDMI |
| Output Port | 1 x LAN |
| Audio Format | MPEG4-AAC Stereo |
| Control | |
| Control Method | Front Panel Buttons, VDirector App (IOS/Android/Windows Version) |
| General | |
| Power Supply | DC12V 3A |
| Power Consumption | 14W (Max) |
| Dimensions (W x H x D) | 215mm x 25mm x 260.2mm/ 8.46” x 0.98” x 10.24” |
| Net Weight | 1.40kg/3.08lbs |
MORE CUSTOMIZATION, DISCUSS to us Directly please
