FT232-M
PIISUN
| Quantity: | |
|---|---|
Ideal for programmers, hardware engineers and DIY User.
Compared to other USB to TTL UART adapters, this adapter not only supports 3.3V and 5V logic levels, but also adds support for 1.8V logic levels.
At the same time it is equipped with a protective plastic case, this protective plastic case can effectively prevent static interference and various short circuits.
Specification:
Main chip: FTDI FT232RL
Pin Definition: CTS,RTS,RXD,TXD,GND,VCC
Output VCC: 1.8V/3.3V/5V
TTL Level: 1.8V/3.3V/5V
USB interface: 2.0
The maximum speed: 3Mbps
About indicator LED:
PWM LED:Power Indicator
RXD LED:The data transmission indicator flashes when there is data from the USB port.
TXD LED:The data receiving indicator flashes when the USB port receives data.
List of supported systems
1,Windows xp,7,8,10
2,Ubuntu 11.10, kernel 3.0.0-19
3,Mac OS X 10.3 to 10.8 (32 &64 bit)
4,Mac OS X 10.9 and above(64 bit)
You can download the driver directly from FTDI's website
Packing list:
1 X FTDI FT232RL USB to TTL Adapter module
WARRANTY:
PIISUN Technology offers a 1-year warranty and lifetime technical support for this USB-to-TTL adapter。If you meet any question, Please contact us, We will fix your issue within 24 hours.
Important Notes
This product uses FTDI FT232RL chip by default, because of the chip out of stock, some production batches use FTDI FT232RNL model chip . Please do not worry, FT232RNL is also the chip produced by FTDI, can completely replace FT232RL. If you still care about these please contact us.
Original FT232RL onboard
Supports Mac, Linux, Android, WinCE, Windows 7/8/8.1/10/11...
3 power mode : 5V output, 3.3V output, or powered by target board (3.3V-5V)
3 LEDs: TXD LED, RXD LED, POWER LED
Functional Pins
TXD, RXD, RTS#, CTS# : connected to the onboard soldered pinheaders
The other Pins : accessable on the drill holes (separate pinheaders are also provided for easily connecting to user system, the pitch is compatible with bread boards)
In the case of working with a MCU:
VCCIO ↔ 3.3V or 5V output (the module is powered from USB, onboard jumper should be shorted to 3.3V or 5V)
GND ↔ GND
TXD ↔ MCU.RX (signal direction: MCU.RX << FT232 << PC.TX)
RXD ↔ MCU.TX (signal direction: MCU.TX >> FT232 >> PC.RX)
RTS ↔ MCU.CTS (signal direction: MCU.CTS << FT232 << PC.RTS)
CTS ↔ MCU.RTS (signal direction: MCU.RTS >> FT232 >> PC.CTS)
Ideal for programmers, hardware engineers and DIY User.
Compared to other USB to TTL UART adapters, this adapter not only supports 3.3V and 5V logic levels, but also adds support for 1.8V logic levels.
At the same time it is equipped with a protective plastic case, this protective plastic case can effectively prevent static interference and various short circuits.
Specification:
Main chip: FTDI FT232RL
Pin Definition: CTS,RTS,RXD,TXD,GND,VCC
Output VCC: 1.8V/3.3V/5V
TTL Level: 1.8V/3.3V/5V
USB interface: 2.0
The maximum speed: 3Mbps
About indicator LED:
PWM LED:Power Indicator
RXD LED:The data transmission indicator flashes when there is data from the USB port.
TXD LED:The data receiving indicator flashes when the USB port receives data.
List of supported systems
1,Windows xp,7,8,10
2,Ubuntu 11.10, kernel 3.0.0-19
3,Mac OS X 10.3 to 10.8 (32 &64 bit)
4,Mac OS X 10.9 and above(64 bit)
You can download the driver directly from FTDI's website
Packing list:
1 X FTDI FT232RL USB to TTL Adapter module
WARRANTY:
PIISUN Technology offers a 1-year warranty and lifetime technical support for this USB-to-TTL adapter。If you meet any question, Please contact us, We will fix your issue within 24 hours.
Important Notes
This product uses FTDI FT232RL chip by default, because of the chip out of stock, some production batches use FTDI FT232RNL model chip . Please do not worry, FT232RNL is also the chip produced by FTDI, can completely replace FT232RL. If you still care about these please contact us.
Original FT232RL onboard
Supports Mac, Linux, Android, WinCE, Windows 7/8/8.1/10/11...
3 power mode : 5V output, 3.3V output, or powered by target board (3.3V-5V)
3 LEDs: TXD LED, RXD LED, POWER LED
Functional Pins
TXD, RXD, RTS#, CTS# : connected to the onboard soldered pinheaders
The other Pins : accessable on the drill holes (separate pinheaders are also provided for easily connecting to user system, the pitch is compatible with bread boards)
In the case of working with a MCU:
VCCIO ↔ 3.3V or 5V output (the module is powered from USB, onboard jumper should be shorted to 3.3V or 5V)
GND ↔ GND
TXD ↔ MCU.RX (signal direction: MCU.RX << FT232 << PC.TX)
RXD ↔ MCU.TX (signal direction: MCU.TX >> FT232 >> PC.RX)
RTS ↔ MCU.CTS (signal direction: MCU.CTS << FT232 << PC.RTS)
CTS ↔ MCU.RTS (signal direction: MCU.RTS >> FT232 >> PC.CTS)
