TTL-232R-5V-AJ
PIISUN
| Quantity: | |
|---|---|
Cable length of 1.8m (6feet)
UHCI/OHCI/EHCI host controller compatible
Diameter of 5mm
24AWG, 2 core and spiral cable
Data transfer rates from 300baud to 3Mbaud at TTL levels
Connect directly to a microcontroller UART or I/O pins
Low USB bandwidth consumption
FCC and CE compliant
Support for FT232R FTDIChip-ID feature for improved security
Operating temperature range from -40°C to 85°C
Communications & Networking, Industrial
The TTL-232R-3V3-AJ/ TTL-232R-5V-AJ (“”audio jack””) is a USB to Serial (TTL level) converter cable which allows for a simple way to connect TTL serial interface units to USB.
This version of FTDI’s USB to TTL serial adapter cable uses a 3.5mm audio jack on the serial interface and has it’s I/O pins configured to operate at 3.3V levels.
The TTL-232R-3V3-AJ/ TTL-232R-5V-AJ uses a FT232RQ unit which is housed inside the USB ‘A’ connector, and is terminated at the end of a 1.8 m (70″”) cable with a 3.5 mm audio jack which provides access to transmit (Tx), receive (Rx), and GND signals.
The TTL-232R-3V3-AJ / TTL-232R-5V-AJ is fully RoHS compliant and is FCC, CE and UKCA approved.
the TTL-232R cables are a family of USB to TTL serial UART converter cables incorporating FTDI’s FT232RQ USB to Serial UART interface IC device which handles all the USB signalling and protocols. The cables provide a fast, simple way to connect devices with a TTL level serial interface to USB.
Available Cables and Part Numbers The following Table 1.1 gives details of the available TTL-232R cables.
Part Number | Description | End Connector* | Cable details |
TTL-232R-5V | USB to UART cable with +5V TTL level UART signals. | 6 pin SIL, 0.1” pitch | 6 core, 26AWG, |
TTL-232R-3V3 | USB to UART cable with +3.3V TTL level UART signals | 6 pin SIL, 0.1” pitch | 6 core, 26AWG, |
TTL-232R-5V-WE | USB to UART cable with +5V TTL level UART signals. | Wire Ended (no | 6 core, 26AWG, |
TTL-232R-3V3-WE | USB to UART cable with +3.3V TTL level UART signals | Wire Ended (no | 6 core, 26AWG, |
TTL-232R-5V-AJ | USB to UART cable with +5V TTL level UART signals. | 3.5mm Audio Jack | 2 core and spiral, |
TTL-232R-3V3-AJ | USB to UART cable with +3.3V TTL level UART signals | 3.5mm Audio Jack | 2 core and spiral, |
TTL-232R-3V3-2mm | USB to UART cable with +3.3V TTL level UART signals | 8 way, keyed, 2mm | 7 core,26 AWG, |
Custom versions also available (subject to MOQ)
Cable length of 1.8m (6feet)
UHCI/OHCI/EHCI host controller compatible
Diameter of 5mm
24AWG, 2 core and spiral cable
Data transfer rates from 300baud to 3Mbaud at TTL levels
Connect directly to a microcontroller UART or I/O pins
Low USB bandwidth consumption
FCC and CE compliant
Support for FT232R FTDIChip-ID feature for improved security
Operating temperature range from -40°C to 85°C
Communications & Networking, Industrial
The TTL-232R-3V3-AJ/ TTL-232R-5V-AJ (“”audio jack””) is a USB to Serial (TTL level) converter cable which allows for a simple way to connect TTL serial interface units to USB.
This version of FTDI’s USB to TTL serial adapter cable uses a 3.5mm audio jack on the serial interface and has it’s I/O pins configured to operate at 3.3V levels.
The TTL-232R-3V3-AJ/ TTL-232R-5V-AJ uses a FT232RQ unit which is housed inside the USB ‘A’ connector, and is terminated at the end of a 1.8 m (70″”) cable with a 3.5 mm audio jack which provides access to transmit (Tx), receive (Rx), and GND signals.
The TTL-232R-3V3-AJ / TTL-232R-5V-AJ is fully RoHS compliant and is FCC, CE and UKCA approved.
the TTL-232R cables are a family of USB to TTL serial UART converter cables incorporating FTDI’s FT232RQ USB to Serial UART interface IC device which handles all the USB signalling and protocols. The cables provide a fast, simple way to connect devices with a TTL level serial interface to USB.
Available Cables and Part Numbers The following Table 1.1 gives details of the available TTL-232R cables.
Part Number | Description | End Connector* | Cable details |
TTL-232R-5V | USB to UART cable with +5V TTL level UART signals. | 6 pin SIL, 0.1” pitch | 6 core, 26AWG, |
TTL-232R-3V3 | USB to UART cable with +3.3V TTL level UART signals | 6 pin SIL, 0.1” pitch | 6 core, 26AWG, |
TTL-232R-5V-WE | USB to UART cable with +5V TTL level UART signals. | Wire Ended (no | 6 core, 26AWG, |
TTL-232R-3V3-WE | USB to UART cable with +3.3V TTL level UART signals | Wire Ended (no | 6 core, 26AWG, |
TTL-232R-5V-AJ | USB to UART cable with +5V TTL level UART signals. | 3.5mm Audio Jack | 2 core and spiral, |
TTL-232R-3V3-AJ | USB to UART cable with +3.3V TTL level UART signals | 3.5mm Audio Jack | 2 core and spiral, |
TTL-232R-3V3-2mm | USB to UART cable with +3.3V TTL level UART signals | 8 way, keyed, 2mm | 7 core,26 AWG, |
Custom versions also available (subject to MOQ)
